back to top
iGBHow-to

Headphone jack not working on Mac? 9 Ways to fix it!

Sajid
By Sajid
Updated:
Macbook headphone jack not working

Key Takeaways

  • If your MacBook headphone jack is not working, first ensure the headphone is in good condition and try restarting your Mac.
  • Clean your MacBook’s headphone jack port and plug your headphones again to see whether they work.
  • Check if your Mac’s audio output source is correct by going to System Settings > Sound > Output tab > Select the External headphones.

I know it’s frustrating when you are in public, and the headphone jack is not working on your Mac. But you are not alone! Many users have reported this issue in Apple’s Community. In most cases, a hardware defect is the culprit. If it isn’t, I’ll show you different ways to fix the MacBook headphone jack when it stops working.

What to do when MacBook Headphone jack not working?

1. Test your headphones

First and foremost, you must check whether your headphones are working. You can try plugging them into another device and playing music. If you can’t hear any sound, check for cable damage, as it may cause malfunction.

On a positive note, if your headphones work with other devices, you can proceed with the troubleshooting methods for your Mac.

2. Clean the headphone jack port

You should always keep your MacBook clean but not neglect the ports. If dirt or debris goes inside the headphone jack port, it can accumulate and fail to recognize the plugged headphones.

You can take a plastic floss or a cotton swab to remove the dirt inside the MacBook port. Furthermore, take a microfibre cloth and clean it further to ensure no debris is left. Then, connect your headphones to the headphone jack to test it.

If you want to clean your Mac, you can check our articles:

3. Check audio output source

When you connect your headphones to your MacBook’s headphone jack, the output source changes automatically. If the headphone jack doesn’t connect well, your Mac may fail to change the output source. In this case, you must manually change the settings.

Method 1: From System Settings

  1. Open System Settings from the Apple menu () on the top left.

    Tap Apple Logo and Select System Settings
  2. Click Sound from the left pane.
  3. Select External Headphones under the Output tab.

    Select Sound and choose External Headphones under Outputs tab

Method 2: From System Information

If you don’t see the audio output source in System Settings, you can check whether your MacBook recognizes your headphones as an audio output source from the System Information.

  1. Pull up Spotlight using the Command (⌘) + Spacebar shortcut.
  2. Search System Information → Press the Return key.

    Open System Information app using shortcut on Mac
  3. Select Audio from the left pane → Click External Headphones.

    Select Audio from the left pane, Click External Headphones
  4. Check whether it has Default Output Device set to Yes.

    Check that Default output device is selected as Yes

If it doesn’t show yes, either your headphones aren’t compatible with macOS, or you might require additional software. Moreover, you may visit your nearest Apple service center to get your MacBook tested.

4. Check volume of headphones

If the output is set to external headphones, but you’re not hearing anything, it could be because of the low volume. Although it’s basic, even I forget my MacBook’s volume is low or muted sometimes.

To increase the volume of your MacBook, press the volume up (F12) button on your MacBook’s keyboard. Alternatively, you can go to System Settings → Sound → Increase the Output volume.

Go to Sound and check Output volume on Mac

5. Restart your MacBook

While this might sound like another basic step, a simple restart of your MacBook can fix many issues related to the headphone jack not working issues. Restarting your MacBook refreshes macOS, removing software glitches.

To restart your MacBook, follow these simple steps below:

  1. Click Apple logo () in the menu bar → Select Restart.

    Just click the Apple logo → choose Restart on your Mac
  2. Choose Restart when asked for a confirmation prompt.

    Tap Restart to restart your Mac
  3. Enter your MacBook’s password after restarting.

6. Turn off Bluetooth

If you’re using Bluetooth accessories, such as speakers, earphones, or headphones with your MacBook, they might interfere with the audio output source.

Turning off Bluetooth will disconnect other Bluetooth accessories, allowing you to use only your headphones with your MacBook. Follow these steps to turn off Bluetooth on your MacBook:

  1. Select System Settings from the Apple menu ().
  2. Click Bluetooth from the left pane → Toggle off Bluetooth.

    Select Bluetooth and toggle of Bluetooth on Mac

Once Bluetooth turns off, connect your headphones to the headphone jack port, and they should work.

7. Switch to another user profile

If you aren’t hearing any sound at all or the sound is coming through your MacBook’s internal speakers, try switching to another user profile. Instead of creating a new user profile, you can enable a guest user account on your MacBook.

Switching to another user profile will re-adjust the audio output sources and fix the headphone jack issue on the MacBook.

8. Restart sound controller

If none of the above options worked, you might want to try some advanced options. Like Windows, macOS uses a sound controller called Core Audio. Core Audio is responsible for the audio requirements of different applications in macOS.

Because the headphone jack is a part of the audio playback, resetting the sound controller can fix it. Here’s how you can reset the sound controller on your MacBook:

  1. Open Activity Monitor from Spotlight or the Launchpad.
  2. Click CPU on the top.

    Select CPU in Activity Monitor on Mac
  3. Type “coreaudiod” in the search box → Press Return.

    Type coreaudiod in the search box, Press Return
  4. Select coreaudiod → Click the X icon to stop the process.

    Select Coreaudiod and Tap the cross icon
  5. Choose Force Quit when confirmation prompt appears.

    Choose Force Quit
  6. Restart your Mac.

Once your Mac restarts, connect your headphone jack and check whether it works.

9. Update macOS

Last but not least, if nothing worked, it could be due to a bug in the macOS. Apple fixes these bugs with the latest updates. Plus, if you’re using developer or public betas, these issues are imminent, and you can’t avoid them.

To fix the bug, you can update macOS on your MacBook. As a result, the headphone jack and many other bugs will be fixed.

For that, go to System Settings → General → Software Update. If any update is available, install that.

MacOS software update

Get your MacBook headphone jack functioning again!

These were a few methods to solve the headphone jack issue on your MacBook. However, users with Intel-based MacBooks may also reset SMC or PRAM/NVRAM.

If you still face issues with your MacBook’s headphone jack, take it to your nearest Apple service center or talk to Apple support. If you have any further questions, please leave them in the comments below.

Read more:

  • Sajid

    Sajid Shaik is a tech enthusiast who explains complex concepts in a clear and concise way. For the past 7 years, he has been a regular contributor to tech blogs and publications, including MakeUseOf and iGeeksBlog. Sajid also has extensive knowledge of the Apple ecosystem, which he shares with his readers through his words. He has created a wide range of content, such as How-Tos, Reviews, Listicles, and much more. Aside from that, Sajid has a degree in Electronics and Communication Engineering, which gives him an advantage in better understanding technology at hardware level. Apart from writing, you can find him fiddling with Apple products or keeping up with all things Apple.

    View all posts

🗣️ Our site is supported by our readers like you. When you purchase through our links, we earn a small commission. Read Disclaimer.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Related Articles